Four-Rotor Rakes
Swadro TC 1370
- Variable, 10.80 to 13.70 m work widths
- Hydraulic rotor suspension
- Integral vibration damper
- Electric rotor height control with two selectable height options
- 710 transport tyres and 16x9.50 bogie tyres are an option
- Hydraulic beam control for less than 4 m transport heights
- KRONE Easy-Line driveline for optimum swaths and rakes
The swath width is adjusted irrespective of the work width by varying the distance between the two rear rotors between 1.40 m and 2.20 m. As another key feature, the tine arms on the rear rotors have five double tines which optimize the work and quality for the following harvester.
The operator controls the work height from the terminal so there is no need to dismount the tractor. You can either adjust all rotors at the same time or each rotor separately. Also, you can program two different heights to the system and retrieve them later by fingertip control – a convenient and effective system that helps you respond instantly to varying conditions.
The transport wheels of the rake are clad with 620/40 R 22.5 tyres and have air brakes as a standard feature. But you can also opt for hydraulic brakes and wider 710/35 R 22.5 tyres to improve the performance in boggy terrain. Neither tyre size affects the statutory three-metre transport width. Either configuration is homologated for 40 km/h.
The KRONE Easy-Line driveline is the secret behind the optimal flow of the crop through the rake. This driveline has the leading rotors spin at a 25% higher speed than the rotors at the rear, presenting the material at a wider width to the rear rotors which will then rake it into a fluffy and box swath.
You can set and retrieve separate lift-out heights for the leading and rear rotors from the tractor terminal. But not only does the system allow you to set the lift-out height but also to time the sequences depending on conditions.
The new and trapezoidal frame is made from massive steel tubes that make the TC a high-stability and hard-wearing machine. The elements on the sides are mounted at an angle so they won’t collect material.
The two-piece plastic cover on the beamhouses the electronics, the hydraulic chest and the spools protecting them from debris and damage.
The Swadro TC 1370 offers clear and comfortable navigation. You can choose between the existing ISOBUS-terminal on the tractor, the new KRONE DS 500 or CCI 800 terminal or the established CCI 1200.No matter which terminal you opt for, each terminal offers fast and straightforward operation of the entire machine from only two menu levels. All major menus are constantly on display for instant use, eliminating timewasting searches. The four rotors are arranged on the 2x2 screen. No need to move your hand to lift out one rotor. Five fully customizable keys on the bottom bar allow you to set up the unit to your needs. An ISOBUS joystick makes operating the Swadro TC 1370 even more convenient and effective. The DS 100 is an entry-level terminal which allows operators to confirm all machine functions by fingertip control.
