Articulated drawbar for high ground clearance
Drawbar suspension for comfortable rides
Camless pick-up, W-arrangement of tines
Swing-out cutterbar with 46 selectable knives
Massive cut-and-feed rotor with wide Hardox tine plates
Geater capacity from pivoting headboard
Double chain-and-slat floor slopes at front
Steel structure and steel floor

Loading and forage transport wagon with discharge rollers
Volumetric capacity according to DIN 11741 40 m³
Total length: 10,065 mm
Total width: 2,980 mm
Total height: 3,950 mm
Track: 2,050 mm
PTO speed 1,000 rpm
Power requirement approx. 125 kw (170 hp)

Hitch
Hydraulic lifting drawbar
Hydraulic drawbar suspension (810)  
Driveshaft with wide angle joints on both ends, 1 3/8", Z=6 incl. overload clutch
Hydraulic system Load Sensing as well as to operate with pressure circulation
Pick-up
Crop press roller unit
Transversal pivoting pick-up suspension
Camless pick-up EasyFlow (work width 2,015 mm according to DIN 11220), tines arranged in a W-shape (tines spaced 55 mm apart), height adjustable pivoting guide wheels 16x6.50-8  
Cut-and-feed rotor
Optimized rotor drive with oversized spur gear  
Power-saving cut-and-feed unit with 8 rows of tines plated with wear-resistent Hardox steel
1,785 mm feed channel width ensures optimum filling level of the loading area  
Cut-and-feed unit with 46 knives, segmental switchable with central adjustment (0 / 23 / 23 / 46)  
Power-saving precision scissor-type cutting, 37 mm / 74 mm (half set of knives)
Individual knife protection (knife protection sensitivity adjustable to crop conditions)  
Automatic reset of the activated knives
For maintenance purpose left-side pivoting blade cassette, unlocking controllable from the side of the wagon  
Rotor cover (for usage as transportation trailer for forage crops)
Loading area
Pivoting front wall
Basic automatic loading
Lower floor conveyor and therefore shortened feed channel ensures fuel-saving operation and special crop protection as well as optimum filling of the loading area
Double floor conveyor with 4 round steel conveyor chains
Hydraulic scraper conveyor drive on both sides
Reversing valve for 2 floor conveyor speeds (rapid traverse)  
Solid steel extensions with vertically straight side wall
LED loading area lights (consisting of a cable harness and four LED bars)  
Wide hatch with folding stepladder and handgrip
Hydraulic tailgate incl. aperture sensor and scraper conveyor switch-off
Dosing unit
Discharge rollers and scraper conveyor switch-off  
Changing drive between feed rotor and discharge roller
Direct discharge roller drive incl. freewheel, protected by main PTO shaft
Further equipment
Comfort on-board electronic 1.0 ISOBUS-compatible, without operation unit (When the tractor is ISOBUS-incompatible, B290 is additionnally required! If no ISOBUS terminal available, aditionnally select B411, B412, B413 or B308) (3011)

Contour marking is available at spare parts center (material no. 20 059 285 0).

For tractors with a differing PTO profile the following PTO shafts are available from Krone parts:
1 3/4 Z=6 splines: material no. 270008120
1 3/4 Z=20 splines: material no. 270000030
1 3/8 Z=21 splines: material no. 270033970