Fully-featured multi-purpose forage wagon
Collapsible, steel or silage extensions
Massive pick-up and feed rotor
32-blade cutting system

Self-loading wagons
Volumetric capacity according to DIN 11741 28 m³  
Total length: 8,800 mm
Total width: 2,585 - 2,635 mm
Total height: 3,640 - 3,690 mm
Track: 1,950 mm
PTO speed 1,000 rpm
Power requirement approx. 66 kw (90 hp)

Hitch
Articulated drawbar  
Driveshaft with wide angle joint on one end, 1 3/8", Z=6
Hydraulic system compatible with load-sensing and usable as pressure-less circulating system (for tractors with or without load-sensing system)  
Pick-up
Crop press roller unit  
Transversal pivoting pick-up suspension  
"Camless pick-up EasyFlow (work width 1,800 mm according to DIN 11220), with 5 rows of tines arranged in a W-shape (tines spaced 55 mm apart), height adjustable pivoting guide wheels 16x6.50-8"
Cut-and-feed rotor
Rotor drive with oversized chain drive with strengthened 1 1/2" roller chain incl. automatic chain tensioner and automatic chain lubricator  
Power-saving cut-and-feed unit with 6 rows of tines plated with wear-resistent Hardox steel
1.510 mm feed channel width ensures optimum filling level of the loading area
Cut-and-feed unit with 32 knives, segmental switchable with central adjustment (0 / 16 / 16 / 32)  
Power-saving precision scissor-type cutting, 45 mm / 90 mm (half set of knives)  
Individual knife protection (knife protection sensitivity adjustable to crop conditions)  
Automatic reset of the activated knives
For maintenance purpose left-side pivoting blade cassette, unlocking controllable from the side of the wagon  
Loading area
Lower floor conveyor and therefore shortened feed channel ensures fuel-saving operation and special crop protection as well as optimum filling oif the loading area  
Double floor conveyor with 4 round steel conveyor chains
Hydraulic tailgate incl. aperture sensor and scraper conveyor switch-off  

These forage/discharge wagons are equipped with a towing hitch DIN 11026 or with ball coupler (80) for version 0630. They may only be towed to a tractor provided with a suitable hitch coupling.

Load-sensing connection
Signal line is assembled as standard and can be connected and used if necessary.

For tractors with a differing PTO profile the following PTO shafts are available from Krone parts:
1 3/4 6 splines: material no. 27 018 116 0
1 3/4 20 splines: material no. 27 018 117 0
1 3/8 21 splines: material no. 27 018 115 0

* Ball coupler Ø 80 mm / ring towing hitch Ø 50 mm:
Assembly of the tractor-sided cross points by KRONE dealer only. (Attention: additional charges)